|
Rubber
Hanger
Description:
Rubber hanger enables
the exhaust tube to be held in suspension below the
vehicles floor bed. It is made of EPDM rubber for
heat and weathering resistance. Thus the hot flue
gasses from the engine are exhausted from the rear
of the vehicle without the vibration or heat or smoke
affecting the ride comfort or the immediate environment
of the passengers.
Location:
It is fitted below
the vehicle floor bed on the chassis
Usage:
It is used in Mahindra
and Mahindra Scorpio Vehicle. The design is common
for several other vehicles including Hyundai's Sentro
and Accent vehicles
Bump Stop Rear Axle
Description:
This part is designed
to dampen impact and vibration transmitted whenever
vehicle travels over speed breaker or any undulating
surface, which can cause the axle to move up or down
suddenly causing sudden and severe impact on the leaf
springs
Location:
It is fitted above
the rear axle
Usage:
On Mahindra & Mahindra
Scorpio Vehicle
Coil Spring Rubber Pad
Description:
This is used as a
cushioning layer over the top and bottom surfaces
of the coil springs used in suspension of vehicles.
These, together with the springs, absorb the impact
and vibration caused when the vehicle goes over speed
breakers and undulations on the surface of the road.
They also prevent metal to metal contact between the
springs, the chassis and the floor bed thus eliminating
noise
Location:
On top and bottom
surfaces of coil springs in the suspension of vehicles
Usage:
In Mahindra &
Mahindra Scorpio Vehicles. Similar designs are employed
for Tata 207, 407, 608, 709 and other vehicles
Buffer Springs
Description:
Used for impact or
vibration absorption whenever vehicle goes above speed
breakers and undulating road surfaces. Acts as an
axle bump stop.
Location:
Above Rear / Front
Axle
Usage:
In Mahindra &
Mahindra Vehicles
Front Suspension Kit
Description:
Used for vibration
absorption in the front suspension of vehicles
Location:
In the front suspension
pivots, controlarms, breakrod assembliear, Sway bars
etc.
Usage:
In Tata 207 Family
of Vehicles
Rear
Suspension Kit
Description:
Metal bonded rubber
bushes used in rear suspension links, Panhard rods,
leaf springs & coil springs for vibration dampening
Location:
In rear suspension
links, Panhard rods, leaf springs & coil springs
assembling
Usage:
In all Tata
& Mahindra vehicals in the 207/407 category.
|
|